T (75), S (75), White balance shift – Sony NEX-VG20 User Manual

Page 75: Cinematone, Self-timer, Drive mode, Af mode

Advertising
background image



Table of C

on

ten

ts

Sear
ch image

Inde
x

US

Tips

You can adjust the automatic exposure level to

brighter or darker when [Exposure] is set to

[Auto].

Touch

if the subject is white or the

backlight is bright, or touch

if the subject

is black or the light is dim.

You can also adjust manually by using the

MANUAL dial (p. 46).

White Balance Shift

You can adjust the white balance manually.

 Off

Adjusts the white balance automatically.

On ( and adjusted number)

Adjusts the white balance manually.

Tips

When the white balance is set to a lower value,

images appear bluish, and when it is set to

higher value, images appear reddish.

You can also adjust manually by using the

MANUAL dial (p. 46).

Cinematone

The camcorder automatically adjusts

the color of the movie to resemble the

atmosphere of film camera images when

recording a movie.

 Off

Does not use the Cinematone function.

On

Uses the Cinematone function.

Notes

When you switch the [

Cinematone]

function on or off, the image will be paused

temporarily.

Self-Timer

Press PHOTO to start the count down. A

photo is recorded after about 10 seconds.

 Off

Cancels the self-timer.

On ( )

Starts the self-timer recording. To cancel the

recording, touch [Reset].

Tips

You can also operate by pressing PHOTO on

the Wireless Remote Commander (p. 113).

Drive Mode

You can set the drive mode, such as

continuous or bracket shooting. This item

is available in still image recording mode

only.

 Single Shooting

Shoots 1 still image. Normal shooting mode.

Cont. Shooting ( )

Shoots images continuously at high speed

while you press and hold down PHOTO.

Focus and brightness settings of the first shot

are used for the following shots.

Bracket: 0.3 EV ( )

Takes three photos, with different EV settings,

each of which differs by 0.3 EV.

Bracket: 0.7 EV ( )

Takes three photos, with different EV settings,

each of which differs by 0.7 EV.

Note

[Single Shooting] is always set when using

the PHOTO button on the Wireless Remote

Commander for shooting. Note that shooting

may not be possible if it is difficult to focus on

a subject.

AF Mode

Selects the focus method when PHOTO is

pressed.

Advertising
This manual is related to the following products: