Setting the stand, About descriptions in this manual, Setting to portrait or landscape orientation – Sony DPF-D92 User Manual

Page 16

Advertising
background image

16

GB

• Using a battery other than the specified one may

result in the battery rupturing.

• Dispose of used batteries as specified by the local

authorities.

• Do not leave the remote control in a very hot and

humid place.

• Take care that no foreign objects get inside the

remote control when you, for example, replace the
battery.

• Incorrect use of the battery may cause leaking and

corrosion.

– Do not recharge the battery.

– When the remote control will not be used for a

long period of time, remove the battery from the
remote control to prevent leaking and corrosion.

– Incorrectly inserting, shorting, dismantling, or

heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.

About descriptions in this
manual

The operations described in this manual are
based on remote control operation. When an
operation is performed differently, for example,
with the remote control and the buttons on the
photo frame, it will be explained in a tip.

Setting the stand

1

Hold the photo frame tightly and
insert the stand straight into the
screw hole on the rear panel.

2

Screw the stand into the screw hole
firmly until the stand stops turning.

Setting to portrait or landscape
orientation

You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.

Advertising
This manual is related to the following products: