Sony DPF-D92 User Manual
Page 48
48
GB
Operating an external
device connected to the
photo frame
You can connect a mass-storage-complaint
digital camera, a USB memory device, a photo
storage device, or other external device to the
photo frame and display an image directly from
the external device.
Notes
• We cannot guarantee connection with all types of
mass storage devices.
• The playback device will be switched to the
external device if you connect the external device to
the USB A/Bluetooth jack during playback the
internal memory.
1
Connect the photo frame to the AC
power source. (
2
Set the digital camera or external
device to mass storage connection
mode.
The setting and operation method used
before connecting differ depending on the
digital camera or external device. Refer to
the operating instructions supplied with
the digital camera or external device. (If
you are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
3
Turn the photo frame to ON.
(
4
Connect the digital camera or
external device to the USB A/
Bluetooth connector.
Use the USB cable supplied with the
digital camera or external device to
connect to the photo frame.
5
Select the playback device.
(
An image on the device is displayed on
the screen.
For details on the slideshow, refer to
page 29. For details on adding images to
the internal memory, refer to page 32.
Notes
• When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
• Do not disconnect the USB cable or turn the photo
frame and external device off while the access lamp
on the external device is flashing. Doing so may
damage the data stored on the external device. Sony
assumes no responsibility for any damage or loss of
data.
• A USB hub or USB device with a built-in USB hub
may not work properly.
• The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
External
memory or
other external
device