Sony HDR-CX190 - Manual (Page 23)


US
G
etting star
ted
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
Select  [Setup]  [ General Settings]  [Language Setting]  a desired language.
To turn off the power
Close the LCD screen.
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
Select  [Setup]  [ General Settings]  [ Beep ]  [Off].
Notes
The recording date, time and condition are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To display
them, select  [Setup]  [ Playback Settings]  [Data Code]  [Date/Time].

To set the date and time again: [Date & Time Setting] (p. 63)
To calibrate the touch panel: [Calibration] (HDR-CX200/CX210/PJ200) (p. 72)



 90 degrees to the camcorder
 90 degrees (max.)
 180 degrees (max.)