Sony DVP-SR210P User Manual

Cd/dvd player, Reference guide dvp-sr210p, Warning

Advertising
background image

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

The AC power cord must be changed only at a

qualified service shop.

Batteries or batteries installed apparatus shall

not be exposed to excessive heat such as

sunshine, fire or the like.

CAUTION

The use of optical instruments with this product

will increase eye hazard. As the laser beam used in

this CD/DVD player is harmful to eyes, do not

attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.
This symbol is intended to alert the

user to the presence of important

operating and maintenance (servicing)

instructions in the literature

accompanying the appliance.

Precautions

ˎ

ˎ To prevent fire or shock hazard, do not place

objects filled with liquids, such as vases, on the

apparatus.

ˎ

ˎ The player is not disconnected from the AC

power source as long as it is connected to the

wall outlet, even if the player itself has been

turned off.

ˎ

ˎ Do not install this player in a confined space,

such as a bookshelf or similar unit.

ˎ

ˎ Install the player so that the AC power cord can

be unplugged from the wall socket immediately

in the event of trouble.

ˎ

ˎ If the player is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lenses inside the

player. Should this occur, the player may not

operate properly. In this case, remove the disc

and leave the player turned on for about half an

hour until the moisture evaporates.

For customers in the USA

Owner’s Record

The model and serial numbers are located at the

rear of the unit. Record the serial number in the

space provided below. Refer to them whenever

you call upon your Sony dealer regarding this

product.

Model No.______________

Serial No.______________

CAUTION

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Note

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

ˎ

ˋ Reorient or relocate the receiving antenna.

ˎ

ˋ Increase the separation between the equipment

and receiver.

ˎ

ˋ Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

ˎ

ˋ Consult the dealer or an experienced radio/TV

technician for help.

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement of

the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms

or when unused for long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Region code

Your player has a region code printed on the back

of the unit and only will play commercial DVDs

labeled with an identical region code or

.

Copyrights and trademarks

ˎ

ˎ Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

ˎ

ˎ “DVD Logo” is a trademark of DVD Format/Logo

Licensing Corporation.

ˎ

ˎ MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

ˎ

ˎ Windows Media is either a registered trademark

or trademark of Microsoft Corporation in the

United States and/or other countries.

This product contains technology subject to

certain intellectual property rights of Microsoft.

Use or distribution of this technology outside of

this product is prohibited without the

appropriate license(s) from Microsoft.

ˎ

ˎ This product meets ENERGY STAR

guidelines

for energy efficiency.

ENERGY STAR and the ENERGY STAR mark are

registered U.S. marks.

ENERGY STAR is a registered mark owned by the

U.S. government.

Control Menu Display

Press DISPLAY.

To change the Control Menu display, press

DISPLAY again.

The available items differ depending on the

disc/file or the situation.

ˎControl Menu items:  “Menu list”

Selected item options

ˎNumber of titles

Number of chapters
Playing time

ˎPlayback status

Media type

ˎSelected Control Menu item

Operation message

Menu list

TITLE/SCENE/TRACK

CHAPTER/INDEX

TRACK

TIME/TEXT

TOP MENU/MENU

ORIGINAL/PLAY LIST

PROGRAM

Select “SET

,” then press ENTER and select

the title (T), chapter (C), or track (T) you want
to program, and press ENTER. Press

.

SHUFFLE

REPEAT

A-B REPEAT

Select “SET

,” then press ENTER. Select

point A and point B by pressing ENTER.

PARENTAL CONTROL

Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
PLAYER

: Enter your 4-digit password,

then press ENTER. Select the level in “LEVEL.”
The lower the value, the stricter the
limitation. Select an area in “STANDARD.”
When you select “OTHERS

,” select and

enter a standard code.

 “PARENTAL

CONTROL AREA CODE LIST”
PASSWORD

: Enter a 4-digit password.

If you forget your password, enter “199703”
in the password box, press ENTER, and then
enter a new 4-digit password.

SETUP

You can adjust various settings when the
player is in stop mode.
QUICK: Adjusts the basic settings.
CUSTOM:

 “CUSTOM menu”

RESET: Returns the settings in “SETUP” to
the default setting.

ZOOM

During zoom, scroll using

///.

ANGLE

CUSTOM PICTURE MODE

Selects the picture quality.
STANDARD: Displays a standard picture.
DYNAMIC: Produces a bold dynamic picture.
CINEMA: Enhances details in dark areas.
MEMORY

: Adjusts the picture in greater

detail.

SHARPNESS

Exaggerates the outline of the image.
1: Enhances the outline.
2: Enhances the outline more than 1.

Items for DATA files

ALBUM (music/photo)

FILE (photo)

ALBUM (video)

FILE (video)

DATE

INTERVAL

Specifies the duration for which the slides
are displayed on the screen.

EFFECT

Selects the effects to be used for changing
slides during a slide show.
MODE 1: Random
MODE 2: From top left
MODE 3: From top
MODE 4: From left
MODE 5: From the center

MEDIA

Selects the media type you want to play.
VIDEO: Plays video files.
PHOTO (MUSIC): Plays photo and music
files as a slide show when music and photo
files are placed in the same album.
PHOTO: Plays photo files.
MUSIC: Plays music files. To play music with
lyrics, press SUBTITLE while playing music
files that contain MP3 ID3 Lyrics.

CUSTOM menu

LANGUAGE SETUP

OSD (On-Screen Display): Switches the
display language on the screen.
MENU: Selects the language for the DVD
VIDEO’s menu. When you select “OTHERS

,” select and enter a language code.

 “LANGUAGE CODE LIST”
AUDIO: Switches the language of the sound
track recorded on the DVD VIDEO. When you
select “ORIGINAL,” the language given
priority in the disc is selected.
SUBTITLE: Switches the language of the
subtitle recorded on the DVD VIDEO. When
you select “AUDIO FOLLOW,” the language
for the subtitles changes according to the
language you selected for the sound track.

SCREEN SETUP

TV TYPE: Selects the aspect ratio of the
connected TV.

16:9

4:3 LETTER BOX

4:3 PAN SCAN

SCREEN SAVER: When set to “ON,” the
screen saver appears when the player is in
pause or stop mode for 15 minutes. Press

 to turn off the screen saver.
BACKGROUND: Selects the background
color or picture on the TV screen. If you set
“JACKET PICTURE,” even though the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
BLACK LEVEL: Selects the black level (setup
level) for video signals output from the jacks
other than COMPONENT VIDEO OUT.
BLACK LEVEL (COMPONENT OUT): Selects
the black level (setup level) for video signals
output from the COMPONENT VIDEO OUT
jacks.
PROGRESSIVE (COMPONENT OUT ONLY):
Set to “ON” if your TV accepts progressive
format signals. When you select “ON,” set
also the following “MODE (PROGRESSIVE)”
and “4:3 OUTPUT.” If the picture does not
appear normally or goes blank, reset the
setting. See “Troubleshooting” (There is no
picture/picture noise appears).
MODE (PROGRESSIVE): If you select “AUTO,”
the player detects the format (film-based or
video-based), and converts to the
appropriate version.
4:3 OUTPUT: This setting is effective only
when you set “TV TYPE” to “16:9.” Select
“FULL” when you can change the aspect
ratio on your TV.

CUSTOM SETUP

AUTO PLAY: When set to “ON,” the player
automatically starts playback when the
player is turned on.
PAUSE MODE: Selects the picture in pause
mode for DVDs. Normally select “AUTO.”
When the picture is output in high
resolution, set to “FRAME.”
TRACK SELECTION: Gives the sound track
which contains the highest number of
channels priority when you play a DVD
VIDEO on which multiple audio formats
(PCM, DTS, or Dolby Digital format) are
recorded. If you select “AUTO,” priority is
given.
MULTI-DISC RESUME: Switches the Multi-
disc Resume setting on or off. Resume
playback can be stored in memory for up to
6 different DVD VIDEOs/VIDEO CDs. If you
start the settings again, the resume point is
cleared.

4-447-474-

11(1)

CD/DVD Player

Reference Guide
DVP-SR210P

© 2012 Sony Corporation Printed in China

Advertising