Sony PEG-TJ37 - Manual (Page 16)

Quick Start Guide
16
10. With your handheld in the cradle and the cradle connected to
the appropriate COM port on your PC, press the sync button on
the cradle. The synchronization process begins, and the
Progress dialog box appears.
Figure 5. HotSync Progress dialog box
Note: If you click Cancel on the Progress dialog box,
synchronization will stop when Intellisync finishes
synchronizing the current handheld application.
11. If a Conflict Resolution dialog box appears, resolve any “data
conflicts.”
Note: For each set of data you synchronize, Intellisync uses a
history file to determine the changes that must be made in each
of your systems to achieve synchronization. This file is created
by the first synchronization of the data. Therefore, a “first run”
synchronization is different from (and may take longer than)
subsequent synchronizations. “First run” synchronizations
simply merge your handheld and PC data, and uses a Conflict
Resolution setting to resolve data conflicts.
When the operation is complete, your handheld displays the
message HotSync complete.