Sony CCD-TRV211 - Manual (Page 6)

6
CCD-TRV11/TRV19/TRV21/TRV29/TRV119/TRV211 3-810-780-23.E
Battery pack
Charging time*(min)
Charging Time
Getting started
Charging and installing the battery pack
*Approximate minutes to charge an empty battery pack using the supplied AC power
adaptor. (Lower temperatures require a longer charging time.)
Before using your camcorder, you first need to charge and install the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
Charging the battery pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to the wall outlet.
(2) Align the right side of the battery pack with the line on the AC power adaptor,
then slide the battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the
wall outlet, and then remove the battery pack and install it on the camcorder.
1 2 3
Battery life
CCD-TRV11/TRV19/TRV119
While
recording
1)
While playing back on
LCD
3)
LCD open 2)
LCD close
NP-33(supplied)
70 (30)
90 (45)
65
NP-68/66H
140 (75)
180 (100)
140
NP-60D
100 (55)
135 (75)
100
Battery pack
POWER CHARGE
NP-33(supplied)
60
NP-55
70
NP-98/98D
215
NP-80/80D
190
NP-68/66H
125
NP-C65
105
NP-60D
90
NP-66
95
NP-66
110 (60)
150 (85)
110
NP-C65
120 (65)
155 (85)
115
NP-80/80D
200 (110)
265 (150)
195
NP-98/98D
225 (120)
305 (170)
225
NP-55
75 (40)
95 (55)
75