Sony KDL-46XBR10 - Manual (Page 20)

20
Establishing the Wireless Communication Between the
Monitor and Media Receiver
1
Press either POWER on the unit or TV POWER on the remote control to turn on the unit
power.
2 Check the LINK indicator on the media receiver.
If wireless communication between the media receiver and monitor is established, this
indicator lights up.
POWER
POWER button
Media receiver
PO
WER
POWER button
Monitor
LINK
LINK indicator
• Refer to the supplied Quick Setup Guide for the communication range of this unit.
• The monitor and media receiver should be placed in the same room.
• Install the media receiver between 20 inches (50 cm) and 33 feet (10 m) away from the monitor.
• Make sure that no objects are blocking the path between the monitor and media receiver. Otherwise
the picture quality may be affected.
• Rearrange the installation position of the monitor and media receiver in case of fuzzy picture.
• Do not place media receiver in a metallic rack.
• Do not use two or more units at the same time in an area of radio interference.
• When the screen does not display properly, check if the Link Level in the Settings/Product
Support/Contact Sony screen is Medium or High.