Sony CCD-TRV328 - Manual (Page 60)

Customizing Your Camcorder 60
b Note
• When you connect your camcorder to the wall outlet, [A.SHUT OFF] is automatically set
to [NEVER].
COMMANDER
For TRV228/428/ TRV265:
b Note
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
DISPLAY
REC LAMP
VIDEO EDIT
For TRV260/265:
You can select up to 20 scenes (programs) and record them in the desired order to
another recording device such as VCR (p. 69).
G ON Select when using the Remote Commander supplied with your
camcorder.
OFF Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
G LCD Select to show the displays such as the time code on the LCD screen
and in the viewfinder.
V-OUT/LCD Select to show the displays such as the time code on the TV screen,
LCD screen, and in the viewfinder.
G ON Select to turn on the camera recording lamp on the front of your
camcorder during recording.
OFF Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the recording lamp.