AT&T DECT 6.0 SB67128 - Manual (Page 6)

Installation
5
After you have plugged in your repeaters in the locations you think
are best, place a call from a cordless handset (AT&T �B6��0�) and
while talking, move around the building to test the reception. You may
want to adjust the position of repeaters to receive the best reception.
Plug the small end of the power adapter into the power jack on the
front of the repeater and route the cord through the slot on the
bottom of the repeater.
Figure 3: Connect the power adapter to the repeater
Plug the small end of the
power adapter into the
power jack on the bottom
of the repeater. Plug the large end
of the power adapter
into a standard
electrical outlet not
controlled by a wall
switch.
Raise the antennas.
Route the power
adapter cord through
the slot on the bottom
of the repeater.