2 insert the battery pack into the battery bay, Inserting battery pack, 3 push the battery bay cover up until it clicks – Sony PCG-FX370 User Manual
Page 23: To charge the battery pack, 1 connect the ac adapter to the notebook, 2 insert the battery pack
Connecting a Power Source
23
2
Insert the battery pack into the battery bay.
3
Push the battery bay cover up until it clicks.
To charge the battery pack
1
Connect the AC adapter to the notebook.
2
Insert the battery pack.
The notebook automatically charges the battery. The battery indicator
flashes in a double-blink pattern as the battery charges.
3
When the battery is 85 percent full, the battery indicator turns off. This
process takes approximately 1.5 hours if your notebook is turned on.
Inserting battery pack
✍
If the port replicator is attached to your notebook, do not attempt to insert or remove
the battery pack. Lifting and turning the notebook with a port replicator attached could
cause a temporary loss of power.
✍
To charge the battery completely, continue charging for an additional hour. See
“Displaying Battery Information” in your online User Guide for more information.
Battery pack
(supplied)
The label side should face down