Sony SLT-A77VM - Manual (Page 145)

145
Setting the image processing
Shoo
ting (Advanced op
erations)
Notes
• When Smart Teleconverter is used, the [Toy Camera] and [Miniature] effects are not
available.
• When [Partial Color] is selected, images may not retain the selected color,
depending on the subject or shooting condition.
• When the exposure mode is set to AUTO, AUTO+, Sweep Panorama, 3D Sweep
Panorama or Continuous Advance Priority AE, or when [Quality] is set to [RAW] or
[RAW & JPEG], Picture Effect cannot be used.
• When [HDR Painting], [Miniature], [Rich-tone Mono.] or [Soft Focus] is selected,
you cannot confirm the effect before shooting. You cannot also set the drive mode.
• When the contrast of the scene is low or when significant camera shake or subject
blur has occurred with [HDR Painting] or [Rich-tone Mono.] selected, you may not
obtain good HDR images. If the camera detects such situation,
is indicated on the
recorded image to inform you of this situation. Shoot again, as necessary,
recomposing or paying attention to the blur.
You can select the desired style to be used to perform image processing,
and adjust the contrast, saturation, and sharpness for each Creative Style.
You can register and recall the settings of Creative Style for each style box.
You can also adjust the exposure (shutter speed and aperture), unlike Scene
Selection where the camera adjusts the exposure.
Creative Style
1
Fn button t (Creative Style) t Select the style box you
want to change the setting
2
Move the cursor to the right with B on the multi-selector, then
select the desired style with v/V.
3
When you want to adjust (Contrast), (Saturation), or
(Sharpness), select the desired item with b/B, then adjust the
value with v/V.
(Standard) For shooting various scenes with rich gradation and beautiful
colors.