Sony PCG-R505DLP - Manual (Page 123)

Troubleshooting the Mouse and Touchpad
123
Troubleshooting the Mouse and Touchpad
My mouse does not work.
❑ If you are using an optional Sony PCGA-UMS1 series USB mouse, verify
the mouse is plugged into the USB port. See “Connecting a USB Device” for
more information.
❑ If you are still experiencing problems, use your supplied Driver Recovery
CD to reinstall the mouse drivers. See “To use the Driver Recovery CD(s)”
for more information.
My touchpad does not work properly.
❑ You may have disabled the touchpad without connecting a mouse to the
notebook. To enable the touchpad:
1 Press the Windows key and use the arrow keys to select All Programs.
Press the Enter key.
2 Use the arrow keys to select Sony Notebook Setup, and press the Enter
key.
3 Select Sony Notebook Setup again, and press the Enter key.
4 Use the arrow keys to select the Touchpad tab.
5 Press the Tab key to select Enable Touchpad, and then press Enter.
❑ Restart the notebook to activate the touchpad again.
❑ If your touchpad is interpreting a single tap as a double-click, adjust the
button assignments. Follow these steps:
1 Press the Windows key and use the arrow keys to select All Programs.
Press the Enter key.
2 Select Sony Notebook Setup, and press the Enter key. Select Sony
Notebook Setup again.
3 Select the Touchpad tab and press the Alt+S keys simultaneously.
4 Make sure the Buttons tab is open, and change the button assignments in
the Mouse Properties dialog box. Press the Enter key to save your
changes and close the dialog box.