Audio options settings, Channel settings, Audio options settings channel settings – Sony KDL-52XBR5 User Manual

Page 40

Advertising
background image

40

Audio Options Settings

MTS
Enjoy stereo, bilingual
and mono programs

Stereo

For stereo reception when viewing a TV program broadcast in stereo.

Auto SAP

Automatically switches the TV to second audio programs when a SAP
signal is received. If no SAP signal is present, the TV remains in
Stereo mode.

Mono

For mono reception. Use to reduce noise during weak stereo
broadcasts.

~

MTS is available only for analog programs.

Speakers

TV Speakers

Select to use the TV speakers for audio.

Audio System

Select this option if you wish to use an external audio system for the
TV sound. By selecting this option you are disabling the TV speakers.

Audio Out
Easy control of volume
adjustment

Fixed

Select to fix the audio output and allow you to adjust the volume with
your audio system’s remote control. (The TV’s remote control’s VOL
and MUTING buttons have no effect on Audio Out.)

Variable

Select to control the Audio Out’s volume and muting with your TV’s
remote control.

~

Alternate Audio is available only for digital programs. If the program you are watching is also available in other

languages from the audio tracks, and if that language is what you have selected in the Language setting, your TV
will automatically switch to the matching language with the Alternate Audio feature. The Alternate Audio
option may be accessed by pressing OPTIONS on the remote control when alternate audio stream is available from
the broadcaster.

Channel Settings

Cable

On

For receiving cable channels via cable TV provider.

Off

For using an antenna.

~

• You should run Auto Program after changing the Cable setting.

Auto Program

Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on On/Off of Cable.

1

Select Auto Program.

2

Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.

3

Press RETURN to exit Auto Program.

~

• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with

the newly scanned channels.

Add Digital Channels

Select to add digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Useful for antenna installation)

Advertising
This manual is related to the following products: