Battery considerations (peg-sl10), Precautions battery considerations (peg-sl10) – Sony PEG-SJ30 User Manual

Page 195

Advertising
background image

195

Chapter 6

Additional information

Precautions

Battery considerations (PEG-SL10)

Follow these precautions when you install or replace the batteries.

When replacing the batteries

INSERT THE NEW BATTERIES WITHIN 1 MINUTE AFTER REMOVING

THE EXHAUSTED ONES. IF THE BATTERY IN YOUR CLIÉ HANDHELD IS
FULLY DISCHARGED OR REMOVED, ALL DATA STORED ON THE
SDRAM (MEMORY) IS LOST. IN SUCH A CASE, PERFORMING A
HOTSYNC

®

OPERATION ONCE THE BATTERIES ARE REPLACED CAN

RESTORE BACKED UP INFORMATION SAVED ON YOUR COMPUTER
(FROM THE LAST HOTSYNC OPERATION) TO YOUR CLIÉ HANDHELD.
FOR DETAILS, SEE “BACKING UP DATA TO YOUR COMPUTER
THROUGH A HOTSYNC

®

OPERATION” ON PAGE 184.

• Be sure to turn your CLIÉ handheld off, before removing/inserting

batteries.

• Be sure to replace both batteries with new ones.

General battery tips

• To avoid possible damage from battery leakage or corrosion, observe the

following:

- Be sure to insert the batteries with the +/– polarities matched to the

+/– marks.

- Do not charge dry batteries.
- Do not use a combination of new and old batteries.
- Do not use batteries other than the types specified.
- Do not use a combination of different types of batteries.
- Do not use leaking batteries.

• Batteries left in your CLIÉ handheld for an extended period of time will

run down, even if your CLIÉ handheld is not used.

• Do not use manganese batteries in your CLIÉ handheld.
• When you are not going to use your CLIÉ handheld for a long time,

remove the batteries to prevent damage from battery leakage and
corrosion.

Continued on next page

Advertising