Sony bloggie MHS-PM1 - Manual (Page 20)

20
MHS-PM1
4-135-531-11(1)
J:\ichihashi\works\cx20300\paper\4135531111MHSPM1\030FNC.fm
master:Left
2 Press (Delete) and select [Select] with v/V, then press the multi-selector.
3 Select the images you want to delete with v/V/b/B, then press the multi-selector to
display the
(Delete) indicator on the selected image.
4 Press (Delete).
5 Select [OK] with B, then press the multi-selector.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 2 instead of [Select],
then press the multi-selector.
To delete images while a single image is displayed
1 Press (Delete).
2 Select [Delete] with v, then press the multi-selector.
[ To view images on TV screen
The connection or the image quality (HD (high definition)/SD (standard definition)) varies
depending on the type of TV or input jacks the camera is connected to.
Connecting to a high definition TV
Images recorded with HD (high definition) image quality are played back with HD (high
definition) image quality. Images recorded with SD (standard definition) image quality are
played back with SD (standard definition) image quality.
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
• The output settings switches automatically according to the images played back. Therefore, the image
may be distorted when switching the mode on the connected TV.
• If you record movies in HD (high definition) image quality [1080 30P]/[720 30P] while connecting the
camera to a high definition TV with a component cable, the image output to the TV is shown in SD image
quality.
Component A/V cable
(supplied)
A/V OUT jack
Green/Blue/Red
White/Red