Sony HDR-SR11 - Manual (Page 17)

17
R
e
co
rd
in
g
/P
lay
ba
ck
US
Name and functions of each part
Buttons, jacks, etc., which are not explained
in other chapters, are explained here.
1 Power zoom lever
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
You can magnify still images from about
1.1 to 5 times the original size (Playback
zoom).
• When you touch the screen during playback
zoom, the point you touched will be displayed in
the center of the LCD screen.
2 Eyecup
3 Viewfinder
You can view images on the viewfinder
with the LCD panel closed. The viewfinder
is useful when you want to avoid wearing
down the battery, or when the image seen
on the LCD panel is poor.
4 Viewfinder lens adjustment lever
Move up the viewfinder and move the
viewfinder lens adjustment lever until the
image is clear.
5 QUICK ON button
When you press QUICK ON, the
camcorder goes to sleep mode (power
saving mode) instead of turning off. The
QUICK ON lamp keeps flashing during
sleep mode. Press QUICK ON again to start
recording next time. Your camcorder
returns to recording standby in
approximately 1 second.
The power turns off automatically if you do
not operate your camcorder for a certain
period during sleep mode.
6 ACCESS lamp (Hard disk)
When the ACCESS lamp is lit or flashing,
your camcorder is writing/reading data.
7 Hook for a shoulder belt
Attach the shoulder belt (optional).
qd Speaker
qf NIGHTSHOT switch
Set the NIGHTSHOT switch to ON (
appears) to record in dark places.
1
2
3
7
4
5
6
8
9
0
qa
qs
qd
qf
qg
qh
qj
qk
ql
w;
wd
wg
wf
ws
wh wk wl
wj
wa
qj
wg
qs
qa
Handycam Station
Recording/Playback