Dubbing to other devices, Connecting with the a/v connecting cable – Sony HXR-MC1 User Manual
Page 39
39
Edi
ting
Dubbing to other devices
You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 9). Refer also to the instruction manuals supplied with the devices to be
connected.
b
Notes
• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard
definition) image quality.
• To copy a movie recorded with HD (high definition) image quality, install the application software
(supplied) on your computer, and copy the images to a disc in the computer.
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
Connect to input jacks of other devices.
B A/V connecting cable with S
VIDEO (sold separately)
When connecting to another device via
the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO
cable (sold separately), higher quality
images can be produced than with an A/
V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable (sold separately). The yellow plug
connection is not necessary. S VIDEO
connection only will not output audio.
Connecting with the A/V connecting cable
Devices without an
S VIDEO jack
: Video/Signal flow
S VIDEO
VIDEO
IN
(Yellow)
(White)
(Red)
AUDIO
(Yellow)
(White)
(Red)
VIDEO
AUDIO
IN
VCRs or DVD/
HDD recorders
Devices with an S VIDEO jack