ADTRAN Atlas 550 - Manual (Page 159)

Chapter 11. Dial Plan
61200305L1-1 ATLAS 550 User Manual 11-17
S TRIP MSD Write security: 3; Read security: 5
Strips a selected quantity (choose from
N ONE , 1 , 2 , and 3 ) of the Most Signif-
icant Digits (MSD) of a dialed number prior to being forwarded out of the
port.
Example:
A network port could be set to accept all calls beginning with 9 (9$) and
S TRIP MSD set to 1 . Then, all digits would be sent toward the network
except the leading 9.
S OURCE ID Write security: 3; Read security: 5
Simplifies the creation of a
D IAL P LAN in applications where the criterion for
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
• Default value = 0. The default ID for all endpoints is 0 and all accept
numbers is 0. With default values, all calls are routed based only on the
dialed number.
• Multiple endpoints can have the same S OURCE ID .
• When creating the C ALL A CCEPT list, specify a S OURCE ID (s) as well as a
dialed number or range of dialed numbers to accept.
Example:
An application requires that all calls that originate from Port 1 of the
ATLAS 550 in Slot 1 be switched to Port 2 of that same module. Assign a
unique Source ID (e.g. 7) to Port 1 of the module, and then configure Port 2
to only accept calls from that unique Source ID (7).
DUAL T1/PRI MODULE: USER TERMINATION/PRI
When you are working in the user termination section of the D IAL P LAN
menu, when S LT is defined as a T1/PRI-2 , and when S IG is set to PRI, the fol-
lowing configuration options are available:
S TRIP MSD does not affect C ALL A CCEPT criteria. All of the digits
(including the MSDs that are subsequently stripped) are used as
accept criterion.
One HDLC resource is used by each PRI or each Packet Endpoint.