Usb mass storage device configuration, Usb mass storage reset delay [20 sec, Emulation type [n/a – Asus P4P800-VM User Manual

Page 63

Advertising
background image

ASUS P4P800-VM motherboard user guide

2-23

Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit

USB Mass Storage Reset Delay [20 Sec]

No USB Mass Storage device detected

Device #1 N/A
Emulation Type [N/A]
Device #2 N/A
Emulation Type [N/A]
Device #3 N/A
Emulation Type [N/A]
Device #4 N/A
Emulation Type [N/A]
Device #5 N/A
Emulation Type [N/A]
Device #6 N/A
Emulation Type [N/A]

USB Mass Storage Device Configuration

Number of seconds
POST waits for the USB
mass storage device
after that start unit
command.

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

Allows you to select the number of seconds POST waits for the USB mass
storage device after the start unit command. The message “No USB mass
storage device detected” appears if none is installed in the system.
Configuration options: [10 Sec ] [20 Sec] [30 Sec] [40 Sec]

The Device items appear only when there are installed USB devices.

Emulation Type [N/A]

When set to Auto, USB devices less than 530MB will be emulated as floppy
drive, and the remaining drives as hard drives. Forced FDD option can be used
to force an HDD formatted drive to boot as FDD (for example, ZIP drive).

Advertising