Af/mf select, Rk (67), Using manual focusing effectively – Sony NEX-5NK User Manual

Page 67

Advertising
background image

67

GB

Ta
ble
of

co
nt

e

n

ts

Sa
mp
le

pho

to

Me
nu

In

dex

AF/MF Select

Selects auto focusing or manual focusing.

1 MENU t [Camera] t [AF/MF Select] t desired mode.

• If you turn the focusing ring when [DMF] or [Manual Focus] is selected, the image is enlarged

automatically to enable you to check focus area easier. You can prevent the image from being enlarged
by selecting MENU

t [Setup] t [MF Assist] t [Off].

(Autofocus)

Focuses automatically.

(DMF)

After focusing automatically, make fine focus adjustment
manually (Direct Manual Focus).

(Manual

Focus)

Adjusts the focus manually. Turn the focusing ring right or left
to make the subject look clearer.

Note

z

Using manual focusing effectively

“Focus fixing” is convenient when you can predict the distance
to the subject. With “Focus fixing,” you can fix the focus in
advance to the distance at which the subject is to pass.

z

To measure the exact distance to the subject

The

mark shows the location of the image sensor*. When you measure the exact

distance between the camera and the subject, refer to the position of the horizontal line. The
distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).

* The image sensor is the part of the camera that acts as the film.

• If the subject is closer than the minimum shooting distance of the attached lens, the focus cannot be

confirmed. Make sure you put enough distance between the subject and the camera.

Bottom

18 mm

(23/32 in.)

Continued

r

Advertising
This manual is related to the following products: