Selecting the display mode – Sony PCG-Z505HSK User Manual
Page 10
Customizing Your VAIO® Z505 SuperSlim Pro™ Notebook
10
Selecting the Display Mode
When you connect an external display, you can toggle the display mode
between the LCD on your computer and an external display.
1
Click the Start button on the Windows 98 taskbar.
2
Point to Settings and click Control Panel.
3
Click Display.
4
Click the Settings tab.
5
Click the Advanced button.
6
Click the NeoMagic
®
tab.
7
Click OK until all the Settings windows close.
Display mode
Function
Internal (LCD)
Activates your computer’s LCD.
External (CRT/
Projector)
Activates an external computer display or RGB
connected projector that is connected to the Monitor
connector on your computer.
✍
You can turn off the computer's LCD display by removing the checkmark from the LCD
option under Internal Display.
If you select CRT/Projector and turn off the LCD, you can use the Refresh Rate slider to
change the display's horizontal frequency. This setting can be made only for CRT display.
If you select Independent Display Timing (see page 11), you can change both the resolution
and the refresh rate.
✍
Some displays do not support using both the computer's LCD and an external display
simultaneously.