Sony NEX-3N - Manual (Page 162)

162 GB
Ta
ble
of
co
nt
e
n
ts
Sa
mp
le
pho
to
Me
nu
In
dex
Connecting with other equipment
Viewing images on a TV
To view images on the camera using a TV, an HDMI cable (sold separately) and an HD
TV equipped with an HDMI connector are required. Refer also to the operating
instructions supplied with the TV.
• Some devices may not work properly.
• Sounds are output only while recording or playing back movies, when the camera is connected with an
HDMI cable.
• Use an HDMI cable with the HDMI logo.
• Use an HDMI micro jack on one end (for the camera), and a plug suitable for connecting your TV on the
other end.
• Do not connect the camera and equipment to be connected using output terminals. This may cause a
malfunction.
• The peaking function is not enabled when the camera is connected using an HDMI cable.
1 Turn off both your camera and the TV.
2 Connect the camera to the TV with an HDMI
cable (sold separately).
3 Turn on the TV and switch the input.
4 Turn on the camera, and then press the
(Playback) button to select playback
mode.
Images shot with the camera appear on the TV screen.
Select the desired image with the control wheel.
Notes
1 To the HDMI
connector
2 To the HDMI micro
jack
HDMI cable
z
On “PhotoTV HD”
This camera is compatible with the “PhotoTV HD” standard.
If you connect Sony PhotoTV HD-compatible devices using an HDMI cable (sold
separately), the TV is set to the image quality suitable for viewing still images, and a whole
new world of photos can be enjoyed in breathtaking Full HD quality.
“PhotoTV HD” allows for a highly-detailed, photo-like expression of subtle textures and
colors. For details, refer to the operating instructions supplied with the TV.
Continued r