Step 2: connecting the system, Connecting the speakers, Gettin g star ted – Sony BDV-T58 User Manual

Page 14

Advertising
background image

14

US

Gettin

g

Star

ted

Step 2: Connecting the System

For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.

• When you connect another component with a volume control, turn down the volume of the other components to a

level where sound is not distorted.

To connect speaker cords to the speaker

You need to connect a speaker cord to each of the front, center, and surround speakers.
The connector of the speaker cords and the color tube are color-coded based on the speaker type.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.

To connect speaker cords to the unit

Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
When connecting to the unit, insert the connector until it clicks.

Connecting the speakers

Color tube

(–)

(+)

Connector

Rear or bottom of the speaker

FRONT R

FRONT L

SUR R

SUR L

CENTER

SUBWOOFER

SPEAKERS

Green
(Center speaker)

Purple
(Subwoofer)

White
(Front left
speaker (L))

Red
(Front right
speaker (R))

Gray
(Surround right
speaker (R))

Blue
(Surround left
speaker (L))

Rear panel of the unit

Advertising