Sony DCR-TRV17 - Manual (Page 125)

125
“Memory Stick” Operations
Superimposing a still picture in a “Memory Stick” on a moving
picture – MEMORY MIX
Before operation
•Insert a tape for recording into your camcorder.
•Insert a recorded “Memory Stick” into your camcorder.
(1) Set the POWER switch to CAMERA or MEMORY.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– to select the still picture you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM
y M. LUMI y C. CHROM y M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still picture is superimposed on the moving picture. Your camcorder
automatically returns to the standby mode.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording. Press PHOTO when you set the
POWER switch to MEMORY.
1
2
4
5
6
1
M. CHROM
M. LUMI
M. LUMI
M. LUMI
I I I - - - - - -
1 0 0 - 0 0 2 1
1 0 0 - 0 0 2 1
I I I - - - - - -
1 0 0 - 0 0 2 1
3
MEMORY
MIX
VCR
CAMERA
MEMORY
OFF(CHG)
POWER
Still picture