Sony DCR-VX2000 - Manual (Page 21)

Recording – Basics
21
Recording a picture
Using the disital zoom – Zoom greater than 12
×
Zoom greater than
12×
is performed digitally, if you set D ZOOM to
24×
or
48×
in the
menu settings. The digital zoom function is set to OFF as a default setting (p. 107). If
you use the digital zoom function, the picture quality deteriorates.
You cannot use the digital zoom:
– When you set PROG. SCAN to ON in the menu settings (p. 107).
– When the POWER switch is set to MEMORY.
Indicators displayed during recording
The indicators are not recorded on the tapes.
[a] Remaining battery time indicator
This appears after you turn on the power and wait for a while.
[b]Cassette memory indicator
This appears when using a tape with cassette memory.
[c] Recording mode indicator
[d]STBY/REC indicator
[e] Time code indicator/Tape counter
[f] Remaining tape indicator
This appears after you insert a cassette.
[g]ND filter indicator
This flashes when the ND FILTER selector should be set. After you have set the ND
FILTER selector, the ND FILTER position selected is indicated. (When the ND OFF
position is selected, the indication disappears.)
[h]Time indicator
The time is displayed about five seconds after the POWER switch is set to CAMERA
or MEMORY.
[i] Date indicator
The date is displayed about five seconds after the POWER switch is set to CAMERA
or MEMORY.
0:00:01
12:05:56PM
45min
40 min REC
[a] [b] [c] [d]
[i] [h]
[g]
[f]
[e]
ND1
JUL 4 2000
T W
The right-ended portion of the bar
shows the digital zooming zone.
The digital zooming zone appears
when you set D ZOOM to
24×
or
48Ч
.