Installing the tv, Preventing the tv from toppling over, Bundling the connecting cables – Sony KDL-40XBR3 User Manual
Page 18
Getting Started
18
KDL-40XBR2/KDL-46XBR2/KDL-40XBR3/KDL-46XBR3
2-678-575-11(1)
D:\WINNT\Profiles\fujii\Desktop\2678575111\01US03INS.fm
masterpage:3 columns Right
Installing the TV
Preventing the TV
from Toppling Over
Attaching the Support Belt
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2
Attach the support belt to the stand with the securing screw (supplied)
using a coin, etc.
3
Adjust the length by pulling the support belt toward you while holding
the TV stand.
Bundling the
Connecting Cables
You can bundle the connecting cables as illustrated below.
✍
Be sure to take measures to prevent the TV from toppling over and
causing injury.
✍
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough, use
commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the
TV stand. Consult your dealer about the types of screw.
✍
Do not bundle the AC power cord with other connecting cables.
PC IN
AUDIO
L
R
5
AUDIO