Setting a screensaver type, Screensaver – Sony NWZ-S616FSLV User Manual
Page 78
NWZ-S515/S516/S615F/S616F/S618F.GB.3-219-717-11(1)
Settings
Setting a Screensaver Type
You can set the screensaver to either a “Clock” or “Blank” for when there is no
operation for a while during song playback or FM reception (NWZ-S615F/
S616F/S618F only). You can also select “None” for no screensaver.
Settings
5-way button
BACK/HOME
button
Press and hold the BACK/HOME button until the Home menu appears.
Press the /// button to select (Settings), and then press
the
button to confirm.
Press the /// button to select “Common Settings,” and then
press the
button to confirm.
The list of “Common Settings” appears.
Press the /// button to select “Screensaver,” and then press
the
button to confirm.
Press the /// button to select “Type,” and then press the
button to confirm.
The list of screensaver type appears.
Press the /// button to select a desired type, and then press
the
button to confirm.
After confirming, the screen in step
appears again.
Clock: When there is no operation for a while, a clock appears as a
screensaver. (Default setting)
Blank: When there is no operation for a while, the screen goes off.
None: The screen does not change to a screensaver.
Hint
While characters are scrolling on the screen, the screen does not change to the
screensaver.
Table of
Cont
ents
Men
u
Inde
x