Sony KLV-40ZX1M - Manual (Page 10)

10
SET, press MENU.
The SET indicator lights up.
Example: To set up a
manufacturer’s CD
1
See the tables in the
supplied “Component
Code Numbers,” and find
the four-digit component
code number for the
desired component.
If more than one code number
is listed, use the number that is
listed first.
2
Press and while holding
Setting a component code
Note
An MD player and a DAV can be set to
any of the above Component Select
buttons. You can assign Component
Select buttons to freely set signals of
your desired components. For further
information, see “Assigning Other
Components to the Component Select
Buttons” (page 33) .
For the functions of buttons as for each
component, see “Table of Preset
Functions” (page 39).
Basic Operations
Setting the Code for
non-Sony Preset
Audio and Visual
Components
— Setting
component codes
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
components, skip the following
procedures.
You can use the Commander with
other major brand preset AV
components also. To use with
other AV components, or Sony
components which do not
function with the Commander,
you need to follow the procedures
to set the correct codes for each
component.
Component
Select Button
TV
DVD
SAT
CBL
VCR
CD
TAPE
AMP
Factory setting
Sony TV
Sony DVD
player
Sony satellite
tuner
Sony cable box
Sony VHS
VCR
Sony CD
player
Sony cassette
deck
Sony amplifier
Preset
component(s)
TV
TV/VCR
Combo
DVD player
Satellite
tuner
Cable box
VCR
CD player
Cassette
deck
Amplifier