To control other devices – Sony NSZ-GT1 User Manual
Page 13
> Did You Know > To Control Other Devices
To Control Other Devices
Complete the AV Receiver setting, press AMP and use keys with orange dots.
For more, read below...
You can control connected devices with the Keypad without using the remote control of each
individual device.
To control an AV Receiver
To control devices with an IR Blaster
Note
If you cannot change channels on a cable/satellite box, press Fn + 1 and select an IR Blaster
device from the list of configured devices in [Video input], then select [IR Blaster settings] -
[Advanced settings] to adjust the settings.
Confirm that the AV Receiver is connected properly, and the proper settings have been made
Preparing to Control an AV Receiver
).
1.
Press AMP.
The indicator lights up to indicate the Keypad is able to control the AV Receiver. The keys with
orange dots can be used to control the AV Receiver.
2.
Confirm that the device is connected properly and the IR Blaster is placed properly.
1.
Press Fn + 1, and then select [Video input] - [Add device manually].
2.
Follow the on-screen instructions to configure the settings.
3.
Like
0
Copyright 2010 Sony Corporation
To Control Other Devices
Search
Help Guide
FAQ
NSZ-GT1
13