Sony PCG-GR390K - Manual (Page 202)

VAIO® Notebook Quick Start
202
Troubleshooting the Printer
I cannot print.
❑ The default setting for the printer port mode is correct for most printers. If
you cannot print, try changing the printer port mode. From the Control
Panel, select Sony Notebook Setup, and then the Printer tab. If the printer
port mode is set to ECP, change it to bi-directional. If the printer port mode is
set to bi-directional, change it to ECP. See “Displaying the Sony Notebook
Setup Screen” for details on using Sony Notebook Setup.
❑ Your connected printer may not function after the notebook resumes from a
power saving mode. If this occurs, follow these steps to reset the printer
connection:
1 Click Start, point to Settings, and then select Printer.
2 Right-click the icon of the printer that is not functioning, and then select
Properties to open the Properties window.
3 Click OK to close the Properties window. The printer should now
function properly.