Sony PCG-GR390K - Manual (Page 71)

Connecting a Universal Serial Bus Device
71
Connecting a Universal Serial Bus Device
You can connect a Universal Serial Bus (USB) device such as an external mouse,
keyboard, speaker, and microphone to your notebook.
To connect a USB device
❑ Locate the USB device identified by the symbol. Plug one end of the
USB cable into this port and the other end into the USB device.
You can use an optional Sony USB mouse PCGA-UMS1 series (not supplied)
with this notebook. Since the USB mouse software driver is preinstalled in the
notebook, you simply plug the USB mouse into the USB port to use it. One USB
port supports one USB device.
✍
The following steps describe the procedure for connecting a USB mouse to your
notebook.
Refer to the manual that came with your USB device for specific installation
instructions.
Connecting USB device to USB port
✍
See the manual that came with your USB device for more information on its
installation and use.
To
USB device
USB
USB connecting cable
(optional)