To connect a digital video camera recorder – Sony PCG-GR390K User Manual

Page 73

Advertising
background image

Connecting an i.LINK Device

73

To connect a digital video camera recorder

Plug one end of the i.LINK® cable (not supplied) into the i.LINK port on the
left side of the notebook and the other end into the DV In/Out port on the
digital video camera recorder.

Connecting digital video camera recorder to i.LINK port

The above figure displays a connection to a Sony digital video camera recorder; your
digital video camera recorder may need to be connected differently.

Only Sony digital video camera ports labeled “DV In/Out” or “i.LINK” are i.LINK-
compatible.

See the manual that came with your digital video camera recorder for more
information on its installation and use.

Do not connect more than one digital video camera at a time. The software supplied
with your notebook will not recognize multiple cameras.

The i.LINK port on the notebook does not supply power to external devices. If the
external device requires power from the i.LINK port, you cannot use the device with
the notebook.

The notebook supports transfer rates up to 400 Mbps; however, the actual transfer
rate is the lowest transfer rate of the external device.

The i.LINK features available may vary depending on the software applications you
use. See the documentation that accompanied your software for more information.

Digital video

camera recorder

To DV In/Out

i.LINK cable

(optional)

To i.LINK port

Advertising
This manual is related to the following products: