Sony HDR-XR260V - Manual (Page 24)


US
To turn off the power
Close the LCD screen or press the POWER button (p. 15).
To adjust the angle of the LCD panel
First open the LCD panel 90 degrees to the
camcorder (), and then adjust the angle
().
To turn off the beep sound
Select  [Setup]  [ General Settings]  [ Beep ]  [Off].
Notes
The recording date, time and condition, and coordinates (HDR-CX260V/CX580V/PJ260V/PJ580V/
PJ600V/XR260V) are recorded automatically on the recording media. They are not displayed during
recording. However, you can check them as [Data Code] during playback. To display them, select
 [Setup]  [ Playback Settings]  [Data Code]  [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto Area
ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending on the
country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto Area ADJ] to
[Off] (HDR-CX260V/CX580V/PJ260V/PJ580V/PJ600V/XR260V).

[Power On By LCD] (p. 69)
To set the date and time again: [Date & Time Setting] (p. 69)
To calibrate the touch panel: [Calibration] (p. 82)





 90 degrees to the camcorder
 90 degrees (max.)
 180 degrees (max.)