Sony NW-E002F - Manual (Page 39)

NW-E001 / E002 / E003 / E005 / E001F / E002F / E003F / E005F.GB.2-678-177-11(1)
39 39
Changing the USB Connection Setting
(USB Power)
Depending on how you are using the computer, if the power supply (USB Bus
Powered) is insufficient, incomplete data transfer may occur from the
computer to the player. In this case, setting the USB connection (USB Power)
to “100mA” may improve data transfer. “500mA” is set by default.
HOME
/ button
 button
/HOME button
Note
• You cannot set this during the USB connection.

Press and hold the /HOME button until the HOME screen
appears.

Press the / button to select (MENU) and press the
 button to confirm.

Press the / button to select “Advanced Menu>” and
press the  button to confirm.

Press the / button to select “USB Power>” and press
the  button to confirm.

Press the / button to select “100mA” or “500mA” and
press the  button to confirm.
To return to the previous menu
Press the /HOME button.
 Hints
• When you connect the player to a laptop computer, we recommend to connect the
laptop computer to a power supply.
• The charging time will be longer if the “USB Power” is set to “100mA.”
Settings
Table of
Contents
Index
Menu