Eye-fi, Transferring image data using the eye-fi card, Cyber-shot user guide print search – Sony DSC-HX30V User Manual
Page 203
Search
Top page > Changing settings > Main Settings > Eye-Fi
Eye-Fi
Transferring image data using the Eye-Fi card
Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the Eye-Fi card with this
camera.
[Eye-Fi] is displayed only when the Eye-Fi card is inserted in the camera.
1. MENU
(Settings)
(Main Settings)
[Eye-Fi]
desired mode
On
Uses the upload function.
The Eye-Fi mode display icon on the screen will change depending on the
communication mode of the Eye-Fi card.
: Eye-Fi card is in standby mode. There is no image to be sent.
: Eye-Fi card is in upload standby mode.
: Eye-Fi card is in connecting mode.
: Eye-Fi card is uploading images.
: An error has occurred.
Off Does not use the upload function.
Notes
●
As of November 2011, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the European Union.
●
For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly.
●
Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due
to local restrictions.
●
The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as
while aboard an airplane. If the Eye-Fi card is inserted, set [Airplane Mode] to [On] (DSC-HX20V/HX30/HX30V only) or
[Eye-Fi] to [Off] (DSC-HX20 only). When the uploading function of the Eye-Fi card is set to [Off],
is displayed on
the screen.
Transferring image data using the Eye-Fi card
1. Set the wireless LAN access point settings or the transferring direction settings of the Eye-Fi card.
For details, refer to the operating instructions supplied with the Eye-Fi card.
2. After the settings are finished, insert the Eye-Fi card into the camera, and shoot the images.
The recorded images are automatically transferred via the wireless LAN to the PC, etc.
Notes
●
When uploading image data, [Eco Mode] is not available.
●
If the
(error) icon is displayed, eject and re-insert the Eye-Fi card, or turn the power of the camera off and on
again. If the
(error) icon is still displayed, the Eye-Fi card may be corrupted. For details, contact Eye-Fi, Inc.
●
Wireless LAN communication may be interrupted by the other communication devices. If data reception is insufficient,
move the camera closer to the access point.
●
Some Eye-Fi cards have an “Endless Memory Mode.” This product does not support “Endless Memory Mode.” Make
sure that Eye-Fi cards that you insert into this product have “Endless Memory Mode” turned off. For details on setting
“Endless Memory Mode”, refer to the operating instructions supplied with the Eye-Fi card.
Copyright 2012 Sony Corporation
194