Battery pack and power, Cyber-shot user guide print search – Sony DSC-HX30V User Manual

Page 242

Advertising
background image

Cyber-shot User Guide

Print

Search

Before Use

Shooting

Viewing

Using MENU items (Shooting)

Using MENU items (Viewing)

Changing settings

Viewing images on a TV

Using with your computer

Printing

Troubleshooting

Precautions/About this camera

Contents list

Top page > Troubleshooting > Troubleshooting > Battery pack and power

Battery pack and power

Cannot insert the battery pack into the camera.

●

Make sure the direction of the battery pack is correct, and insert it until the battery eject lever is locked.

Cannot turn on the camera.

●

After inserting the battery pack into the camera, it may take a few moments for the camera to power up.

●

Make sure that the battery pack is inserted correctly.

●

The battery pack will discharge by itself even if you do not use it. Charge the battery pack before use.

●

Check that the battery pack type is NP-BG1 or NP-FG1.

The power turns off suddenly.

●

Depending on the camera and battery temperature, the power may turn off automatically to protect the camera. In this

case, a message is displayed on the screen before the power turns off.

●

If you do not operate the camera for a certain period of time while the power is on and [Eco Mode] is set to [Standard] or

[Max], the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again.

The remaining charge indicator is incorrect.

●

This is caused when you use the camera in an extremely hot or cold location.

●

Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes

significant, it is probably time to replace it with a new one.

The Power/charge lamp of the camera flashes while charging the battery.

●

Check that the battery pack type is NP-BG1 or NP-FG1.

●

The Power/charge lamp of the camera flashes infrequently when you use a battery pack that has not been used for a

long time. In such cases, remove the battery pack from the camera and re-insert it.

●

For details, see “

Battery pack

”

[Details]

.

The battery is not charged even if the Power/charge lamp turns off and charging is finished.

●

This happens when you charge the battery pack in an extremely hot or cold location. Charge the battery pack within the

proper charging temperature range of between 10°C to 30°C (50°F to 86°F).

The camera makes a noise when it is shaken.

●

If the power is not on, the camera may make a noise when it is shaken. This is not a malfunction.

Back to top

Copyright 2012 Sony Corporation

233

Advertising
This manual is related to the following products: