Charging the battery pack, Cyber-shot user guide print search – Sony DSC-HX30V User Manual
Page 264
Search
Top page > Precautions/About this camera > Precautions > Charging the battery pack
Charging the battery pack
●
The supplied AC Adaptor is dedicated to this camera. Do not connect with other electronic devices. Doing so may cause
a malfunction. Also, make sure to use a genuine Sony AC Adaptor.
●
If the Power/charge lamp of the camera flashes during charging, remove the battery pack being charged, and then insert
the same battery pack into the camera securely again. If the Power/charge lamp flashes again, this may indicate a
battery error or that a battery pack other than the specified type has been inserted. Check that the battery pack is the
specified type. If the battery pack is the specified type, remove the battery pack, replace it with a new or different one
and check that the battery is charged correctly. If the battery is charged correctly, a battery error may have occurred.
●
If the Power/charge lamp flashes even if the AC Adaptor is connected to the camera and the wall outlet (wall socket), this
indicates that the charging has stopped temporarily and is on standby. Charging stops and enters standby status
automatically when the temperature is outside of the recommended operating temperature. When the temperature
returns to the appropriate range, charging resumes and the Power/charge lamp lights up again. We recommend
charging the battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
●
Using the supplied AC Adaptor, you can charge the battery pack inserted in the camera. In addition, power supply via AC
Adaptor in playback mode is also available. However, in shooting mode, power supply via AC Adaptor is not available.
You need the AC Adaptor AC-UD10 (sold separately) for shooting to supply a power from the wall outlet (wall socket)
during shooting.
Copyright 2012 Sony Corporation
255