Sony KDE-37XS955 - Manual (Page 55)

53
Setup
Setting Up the Channel List
After you finish connecting your TV, you need to run Initial Setup, which
automatically sets up available analog and digital channels. The Initial Setup
screen appears when you turn on your TV for the first time after hooking it
up. If you do not want to set up the channels at this time, you can do it later
by selecting the Auto Program option in the Channel menu (see page 99).
Using Auto Setup To run Initial Setup the first time you turn on your TV
1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2 Press V or v to select the on-screen display language. Then press .
The message “Start auto program now?” appears.
3 Press V or v to select “Yes”, then press .
Auto Program automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
s Use the Auto Program feature as described on page 99.
To add individual digital channels
s Use the Digital Channels feature as described on page 99.
The Auto Program feature does not apply for installations that
use a cable box for all channel selection.
Auto Program may take up to 50 minutes or more to complete.
A progress bar is displayed while the channel list is being
created.