Sony ICD-UX71F - Manual (Page 27)

ICD-UX71/UX81/UX71F/UX81F 4-114-023-11(1)

GB
Re
co
rd
in
g/
Pla
yb
ac
k M
es
sa
ge
s
The recording starts when the IC recorder
detects sound. The recording pauses
when no sound is detected and “ ” and
“ ” flash. When the IC recorder detects
sound again, the recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in step 3.
Notes
The VOR function is affected by the sound
around you. Set “MIC SENSITIVITY” in the
menu according to the recording conditions.
If recording is not satisfactory after you have
changed the microphone sensitivity, or for
an important recording, set “VOR” to “OFF” in
the menu.
If you press
 (record/pause) to pause
recording when “VOR” is set to “ON” in the
menu, only “ ” flashes.
During synchronized recording (page
31) and FM recording (page 85), the VOR
function does not work.




Dividing a message into two
during recording
DIVIDE
You can divide a message during
recording so that the message is divided
into two parts, and a new message
number is added to the newer part of
the divided message.