Disconnecting the ic recorder from your computer, Disconnecting the ic recorder from, Your computer – Sony ICD-UX71F User Manual

Page 70

Advertising
background image

ICD-UX71/UX81/UX71F/UX81F 4-114-023-11(1)

0

GB

Notes

If you connect more than two USB devices

to your computer, normal operation will not

be guaranteed.
Use of this IC recorder with a USB hub or a

USB connection support cable other than

the supplied cable is not guaranteed.
A malfunction may occur depending on the

USB devices connected at the same time.
Before connecting the IC recorder to the

computer, make sure that the battery is

inserted in the IC recorder.
It is recommended that you disconnect the

IC recorder from the computer when you are

not using the IC recorder connected to the

computer.

Disconnecting the IC

recorder from your

computer

Follow the procedures below; otherwise,

data may be damaged.

1

Make sure that the operation

indicator is not flashing.

2

Disconnect the IC recorder from the

USB connector of the computer.
On the Windows screen, left-click

“Safely Remove Hardware” on the

taskbar, and click “Safely remove USB

Mass Storage Device.”
On the Macintosh screen, drag the “IC

RECORDER” on the desktop to “Trash”

and drop it there.
For details on disconnecting the

IC recorder, refer to the operating

instructions supplied with your

computer.

Advertising
This manual is related to the following products: