Additional information, Troubleshooting, Overall operations – Sony DEV-50V User Manual
Page 65
Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
Additional information
Troubleshooting
If you run into any problems using this
product, follow the steps below.
Check the list (p. 65 to 73), and
inspect this product.
Disconnect the power source, attach
the power source again after about
1 minute, and turn this product on.
Select
(MENU) [Setup]
[
General Settings] [Initialize].
If you select [Initialize], all settings,
including the clock setting, are reset.
Contact your Sony dealer or local
authorized Sony service facility if the
issue is not resolved.
Overall operations ..........................................p. 65
Batteries/power sources .................................p. 66
Viewfinder .......................................................p. 66
Memory card ...................................................p. 67
Recording .........................................................p. 67
Playback ...........................................................p. 68
Playing back images stored on memory card on
other devices ....................................................p. 69
Editing movies/photos on this product .......p. 69
Playback on the TV ........................................p. 69
Copying/Connecting to other devices .........p. 69
Connecting to a computer .............................p. 69
Overall operations
The power does not turn on.
Attach a charged battery pack to this product
(p. 12).
The plug of the AC Adaptor has been
disconnected from the wall outlet (wall
socket). Connect it to the wall outlet (wall
socket) (p. 12).
This product does not operate even when
the power is set to on.
It takes a few seconds for this product to be
ready to shoot after the power is turned on.
This is not a malfunction.
Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
The menu settings have been changed
automatically.
While Intelligent Auto is active, some menu
settings related to image quality and audio
quality will be changed automatically.
The following menu items return to the default
setting when you switch the photo recording
mode to another mode.
[
Self-Timer]
[Tele Macro]
[White Balance]
[IRIS]
[Shutter Speed]
[Low Lux]
[Scene Selection]
[Auto Back Light]
This product gets warm.
This product may become warm during
operation. This is not a malfunction.
A rattling noise can be heard when you
shake this product.
If no noise is heard when this product is
turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.