Sony DCR-HC62 - Manual (Page 31)

31
R
e
co
rd
in
g/
Pl
ay
bac
k
3
Press mREW.
The tape stops automatically when the
tape counter reaches “0:00:00.”
The tape counter returns to the time
code display, and the zero set memory
display disappears.
4
Press PLAY.
Playback starts from the point
designated “0:00:00” on the tape
counter.
To cancel the operation
Press ZERO SET MEMORY again before
rewinding.
b Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
You can locate the point where the
recording date changes.
Make sure that the PLAY/EDIT lamp
lights up (p. 26).
1
Press SEARCH M. on the Remote
Commander.
2
Press .(previous)/>(next) to
select a recording date.
To cancel the operation
Press STOP.
b Notes
• The Date search will not function correctly
when there is a blank section between recorded
sections on the tape.
Searching for a scene by date of
recording (Date search)
SEARCH M.
./>
STOP
P-MENU
30 min
DATE -01
SEACH
60 min 0:00:00:00
GUIDE