Sony SDM-S53 - Manual (Page 6)

6
(US)
\\Pc08\DATADISK08\Chen Ting\ML\European\SDM-S53_S73_S93 4 GUO\data\SDM-
S53_S73_S93 US FR ES CS(0530)\SDM-S53_S73_S93 US\02GB02BAS-UC.fm masterpage:Left
SDM-S53, SDM-S73 or SDM-S93
4-096-265-21(1)
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor’s
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-S53, SDM-S73 or SDM-S93
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
15 inch (38 cm) (SDM-S53)
17 inch (43 cm) (SDM-S73)
19 inch (48 cm) (SDM-S93)
Input signal format
RGB operating frequency*
Horizontal
× Vertical:
28–61 kHz × 48-75 Hz (SDM-S53)
28–80 kHz
× 48-75 Hz (SDM-S73/S93)
Resolution
Horizontal
× Vertical: Max.
1024 dots
× 768 lines (SDM-S53)
1280 dots × 1024 lines (SDM-S73/S93)
Input signal levels
Analog RGB video signal
0.7 Vp-p, 75
Ω, positive
SYNC signal
TTL level, 2.2 k Ω, positive or negative
(Separate horizontal and vertical, or composite sync)
0.3 Vp-p, 75
Ω, negative (Sync on green)
Power requirements
100 – 240 V, 50 – 60 Hz, Max. 0.6 A (SDM-S53)
100 – 240 V, 50 – 60 Hz, Max. 1.0 A (SDM-S73/S93)
Power consumption
Max. 25 W (SDM-S53)
Max. 45 W (SDM-S73)
Max. 50 W (SDM-S93)
Operating temperature
5 – 35 ° C
Dimensions (width/height/depth)
Display (upright):
SDM-S53
Approx. 339 Ч370Ч186 mm (with stand)
(13 3 / 8
Ч14 5 / 8
Ч7 3 / 8
inches)
Approx. 339
Ч275Ч53 mm (without stand)
(13 3 / 8
Ч10 7 / 8
Ч2 1 / 8 inches)
SDM-S73
Approx. 367 Ч411Ч215 mm (with stand)
(14 1 / 2
Ч16 1 / 4
Ч8 1 / 2
inches)
Approx. 367
Ч315Ч60 mm (without stand)
(14 1 / 2
Ч12 1 / 2
Ч2 3 / 8 inches)
SDM-S93
Approx. 412 Ч445Ч234 mm (with stand)
(16 1 / 4
Ч17 5 / 8
Ч9 1 / 4
inches)
Approx. 412
Ч350Ч64 mm (without stand)
(16 1 / 4
Ч13 7 / 8
Ч2 5 / 8 inches)
Mass
SDM-S53
Approx.3.7 kg (8 lb 2 oz) (with stand)
Approx.2.7 kg (5 lb 15 oz) (without stand)
SDM-S73
Approx.5.4 kg (11 lb 14 oz) (with stand)
Approx 4.1 kg (9 lb) (without stand)
SDM-S93
Approx. 6.6 kg (14 lb 8 oz) (with stand)
Approx. 5.2 kg (11 lb 7 oz) (without stand)
Plug & Play
DDC2B
Included items
See “Setup.”
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
Example
Serial number
INFORMATION
MODEL : SDM-S53
SER. NO : 1234567
MANUFACTURED : 2003-52
Week and
year of
manufacturee
Model name
01COV-UC.book Page 6 Friday, May 30, 2003 6:01 PM