Sony KDL-37L4000 - Manual (Page 12)

Getting Started
12
Connecting the TV
To display clear crisp pictures, you must connect your TV correctly and select
the correct Wide Mode to display the picture in the correct aspect ratio (see
“Changing the Wide Screen Mode” on page 22). It is strongly recommended to
connect the antenna/cable input using the 75-ohm coaxial cable (not supplied)
to receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration. If
you use a 300-ohm twin lead cable, keep it as far away from the TV as
possible.
You can also connect a variety of optional equipment to your TV (see page 15).
For multiple equipment connections, please refer to the Quick Setup Guide.
Cable System or
VHF/UHF Antenna
System Cable or VHF/UHF (or VHF only) Antenna
From Cable settings in Channel settings, select Cable On or Cable Off for
your type of input signal.
Cable Box/Digital
Cable Box Use this hookup if
s
You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
s You do not intend to hook up any other audio or video equipment to
your TV.
Also, set Cable to On in the Cable settings in Channel settings (see page
29).
75-ohm coaxial cable
(not supplied) Rear of TV
CABLE/ANTENNA input
z To change channels using
the cable box, set your TV
to channel 3 or 4
depending on the cable
box channel output.
Auto Program will fix the
channel automatically.
75-ohm coaxial cable
(not supplied)
Cable
IN
jack
OUT
jack
Rear of TV
CABLE/ANTENNA
input