Arrow Plastic SA8662-A - Manual (Page 15)

Step 2
B15
15
● Parts Needed For ●
Frame Assemblies
● ● ● ● ● 6615 Rear Wall Angle (2)
● ● ● ● ● 9924 Rear Wall Channel (2)
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the rear wall. Proceed as
follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2
Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with
one bolt in the
center hole.
3
Set the assemblies aside. You will
use them later.
9924
9924
STEP
1
Rear Wall Channel
94 5/8" 2,40m
6615
STEP
2
6615
Rear Wall Angle
94 5/8" 2,40m
Rear Wall Channel
94 5/8" 2,40m
Rear Wall Angle
94 5/8" 2,40m
STEP
3