Sony HDR-CX300 - Manual (Page 38)


US
 Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
 Touch the one of the media types
displayed on the camcorder
screen to make the computer
recognize your camcorder.
HDR-CX300/CX350/CX350V/CX370
: [ USB CONNECT] (internal
memory)
HDR-XR350/XR350V: [ USB
CONNECT] (internal hard disk)
The displayed recording media differ
depending on the model.
If the [USB SELECT] screen does not
appear, touch (MENU)  [Show
others]  [USB CONNECT] (under
[OTHERS] category).
 Click [Continue] on the computer
screen.


 Follow the on-screen instructions
to install the software.
Connect the camcorder to the computer
during the installation of “PMB.”
Depending on the computer, you may
need to install third party software. If
the installation screen appears, follow
the instructions to install the required
software.
Restart the computer if required to
complete the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
: Starts “PMB.”
: Displays “PMB Help.”
: Displays “PMB Launcher.”
“PMB Launcher” enables you to start
“PMB” or other software, or to open
web sites.
Other icons may appear.
No icon may appear depending on the
installation procedure.




