Zebra remaining flash level redeye reduc – Sony HDR-SR5 User Manual

Page 66

Advertising
background image

66

Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting,

is displayed. The zebra pattern

is not recorded.

B

OFF

The zebra pattern is not displayed.

70

The zebra pattern appears at a screen
brightness level of about 70 IRE.

100

The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.

b

Notes

• Portions of the screen where brightness is about

100 IRE or above may appear overexposed.

z

Tips

• IRE represents the screen brightness.

B

AUTO

Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.

– When your camcorder recognizes the

remaining hard disk capacity with the
POWER switch set to

(Movie).

– When you press DISP/BATT INFO to

switch the indicator from off to on with
the POWER switch set to

(Movie).

– When you select the movie recording

mode on the HOME MENU.

ON

Always displays the remaining hard disk
indicator.

b

Notes

• When the remaining recordable time for movies

is less than 5 minutes, the indicator stays on the
screen.

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.

HIGH(

)

Makes the flash level higher.

B

NORMAL( )

LOW(

)

Makes the flash level lower.

You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
You can prevent redeye by activating the
flash before recording.
Set [REDEYE REDUC] to [ON], then press

(flash) (p. 30) repeatedly to select a

setting.

(Auto redeye reduction): Pre-flashes to

reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r

(Forced redeye reduction): Always

uses the flash and the redeye reducing pre-
flash.
r

(No flash): Records without flash.

b

Notes

• The redeye reduction may not produce the

desired effect due to individual differences and
other conditions.

ZEBRA

REMAINING

FLASH LEVEL

REDEYE REDUC

Advertising
This manual is related to the following products: