To connect a parallel port printer – Sony VGN-A240 User Manual
Page 100
To connect a parallel port printer
1.
Plug the printer cable into the Printer port
on your computer or port replicator, if applicable. See
2.
Plug the other end of the printer cable into the port on the printer.
3.
Restart your computer by clicking Start, Turn Off Computer, and Restart. If the New Hardware Wizard
appears, follow the on-screen instructions.
4.
Make sure the computer recognizes the printer. Follow these steps:
Click Start, Control Panel, Printers and Other Hardware, and then Printers and Faxes.
If the computer recognizes the printer, it will be listed in the Printers and Other Hardware window.
If the computer does not recognize the printer, you may need to install the printer driver software. See
the guide that accompanied the printer for more information.
Connecting a Parallel Printer
See the guide that accompanied the printer for more information on its installation and use.
Page 100