Sony DVP-NW50 - Manual (Page 19)

Chapter 1 Getting Started
19
Setup 4: Setting up “Server Setup, powered by DiXiM” (continued)
Continue to the next page l
9 Enter the information indicated into the boxes in the
“Service Settings” window.
DiXiM Media Server Device
Description of service: DiXiM Media Server Device
Name or IP address (for example 192.168.0.12) of the
computer hosting this service on your network:
Enter the name or IP address of your computer.
External Port number for this service:
Enter “30000,” and then select the TCP radio button.
Internal Port number for this service: 30000
To determine the name of your computer, click “Start”
on the Windows taskbar, right-click “My Computer,”
select “Properties,” and click the “Computer Name” tab.
The name of your computer is shown in the “Computer
description” box.
10 Click “OK.”
The “Service Settings” window closes.
11 Confirm that the the DiXiM Media Server Device
added in step 9 appears in the “Services” list in the
“Advanced Settings” window and that the check box
beside it is selected.
If the service added in step 9 does not appear, click
“Add…,” and complete steps 9 and 10 again.
If there is no check mark in the check box beside the
service, click the check box so that a check mark
appears.